*Older Model Parts

Have an older model stove that doesn't show up on our other parts pages?

We will be adding parts to this page periodically. If you don't see the part you need listed here, first use our "Search" field (at the bottom of this page) to enter the part number (if you know it...if not, just enter a description of the part).
If you still cannot find your part, call us at (800) 516-3636 (parts orders only) to order. You can also let us know that you were looking online for the part, and we may be able to add it to this page. (For all other questions and Customer Service calls, call (800) 245-6489.)

IMPORTANT: If at all possible, please be sure to include your stove's model number and manufacture date in the "Ordering Instructions" box when you check out. This is especially important with older models.

Looking for a stove manual for your older model stove? Check out our manuals page; if you don't see what you need, click here to E-mail our Service Dept and request the manual.

Be sure to check your stove's manual (if available) to be sure you are purchasing the correct part for your stove. We do attempt to be as precise as possible when describing the part and the various models each part fits on, but your owner's manual will contain a list of the most common replacement parts for your particular stove.

AC-01 Decorative Knob Set (3 lbs. each)
$20.79
Decorative brass knobs. Price and weight shown are for set of two (2) matching knobs. These are designed to simply rest on top of your stove (or any flat surface).
[Add to Cart] [View Cart]

AC-12 Blower Thermostat (3 lbs. each)
$74.64
Fan Thermostat
[Add to Cart] [View Cart]

AC-18 Blower (465 cfm) with cord (17 lbs. each)
$151.74
Blower (Complete) for 24-G {7063-6341}
[Add to Cart] [View Cart]

AC-DGK Door Gasket Kit (2 lbs. each)
$13.58
Door gasket kit (models manufactured prior to July 1988). Similar to product pictured. Cement included, 3/4" wide flat gasket. IMPORTANT: Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart] [View Cart]

AC-DGKC Door Gasket Kit (2 lbs. each)
$15.58
Door Gasket Kit for models manufactured after July 1988. 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
[Add to Cart] [View Cart]

AC-FCGK Flue Collar Gasket Kit (2 lbs. each)
$14.55
Flue Collar Gasket Kit. Includes gasket and cement necessary to repair gasket around the stove's flue collar. 3/8" gasket. Include your model number and manufacture date in the "Ordering Instructions" box when you check out.
[Add to Cart] [View Cart]

AC-G3 Glass Kit (3 lbs. each)
$44.87
Glass Kit for 18-PC, 24-AC and 24-FC (FC models prior to 1997 only). Comes with gasket pre-mounted on glass.
NOTE: If you own a 24-FC manufactured between 1997 and 1999, check the measurement. This glass measures 6 7/8" x 7 1/4".
[Add to Cart] [View Cart]

AC-G9 Glass Kit (4 lbs. each)
$70.35
Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 18-TRD, works on all stoves listed on this page (except large coal and some older models, see notes below).
**NOTE: COAL STOVE OWNERS - For 27-C2000 and 50-SHWC2 Coal Stove ONLY, not for 27-C3000 or 50-SHWC3.
**NOTE: For older stove models - Check your owner's manual to insure correct part number. Measure the original glass if owner's manual not available.
[Add to Cart] [View Cart]

AC-GGK Glass Gasket Kit (1 lb. each)
$14.55
Window glass gasket kit. Includes gasket (3/4" x 6' flat, adhesive on one side). Does not include glass.
[Add to Cart] [View Cart]

AC-LB Firebrick (6 lbs. each)
$2.43
9" x 4" x 2.25" (large) Firebrick. Priced per brick.
[Add to Cart] [View Cart]

AC-MCSP Charcoal Spray Paint (2 lbs. each)
$12.13
**NOTE: Charcoal Gray paint no longer available; order AC-MBSP (black paint).
You can change your stove from Gray to Black with two cans of the AC-MBSP paint.
[Add to Cart] [View Cart]

AC-SB Firebrick (3.5 lbs. each)
$2.43
9" x 4" x 1.25" Firebrick (small). Priced per brick.
[Add to Cart] [View Cart]

AC-SH Spring Handle (1 lb. each)
$3.64
Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page.
[Add to Cart] [View Cart]

CA-20 6" Flue Collar (4 lbs. each)
$37.60
6" flue collar. Comes with gasket and bolts necessary to install. Shown on 18-TRD, works on all stoves listed on this page.
NOTE: If you have a wood stove manufactured prior to 1996, measure your flue collar before ordering, you may need the 8" (CA-21) collar. If so, go to the 28-3500 (wood furnace) parts page to add the CA-21 to your Shopping Cart.
[Add to Cart] [View Cart]

CA-23 8" blank (8 lbs.)
$36.90
8" blank with bolts and gasket.
[Add to Cart] [View Cart]

IP-24G Impingement Plate (15 lbs. each)
$47.30
Flame impingement plate. Works with 24-G Wood Furnace. Actual plate is similar to plate pictured here.
[Add to Cart] [View Cart]

IP-25PFS Impingement Plate (16 lbs. each)
$55.79
Impingement Plate for 25-PFS pellet stove (actually a set of three plates). Please be sure to list model number and mfg. date in the Ordering Instructions box when you check out.

[Add to Cart] [View Cart]

PU-076002B Combustion Blower (8 lbs. each)
$138.55
Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598).
NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS.
[Add to Cart] [View Cart]

PU-103-50 Hopper Lid Latch (1 lb. each)
$16.98
Hopper Lid Latch. One per package. NOTE: For pellet stoves manufactured 2001 and earlier. For pellet stoves manufactured 2002 or later, see Part Number PU-62-40-151-3. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. Shown on 25-PDVC, works on all stoves listed on this page.
[Add to Cart] [View Cart]

PU-2X570 Locking Collar (1 lb. each)
$3.64
3/4" I.D. Auger Shaft Locking Collar for pellet stoves. Price listed is for one piece (two pieces are on each stove, one per auger).
[Add to Cart] [View Cart]

PU-4C440 Combustion Blower for 25-PFS/P (5 lbs. each)
$93.38
Combustion (Exhaust) Blower. Includes gasket necessary to install, you must save the adapter from your old blower to use with this replacement. If your pellet stove was built by us and has a 6" top exhaust, this should fit it.
NOTE: Only for 25-PFS/25-PFSP models from 1991 and later. See PU-076002B for any other models.
Be sure to include your stove's model number and date of manufacture in the Ordering Instructions box upon checkout.
[Add to Cart] [View Cart]

PU-4C442 Convection Blower (6 lbs. each)
$130.98
Convection (Room Air) Blower. 140 cfm.
**NOTE on Older Models: Model years 1989-90 use one room air blower; Model years 1991-95 use two room air blowers. (If 1991-95 model, stand behind the stove and determine if "left" or "right" blower, and note this in the "Ordering Instructions" box in your Shopping Cart.)
Model years 1996 and later use one room air blower.

IMPORTANT: This blower is for ALL pellet models except Pellet Utility Furnace, and 2002 and newer Deluxe freestanding and insert pellet models ("Deluxe" models have louvers beside the door). If 2002 or newer "Deluxe" model, see Part Number PU-4C447 Convection Blower.
**NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart.
[Add to Cart] [View Cart]

PU-AF13B Bottom Auger (9 lbs. each)
$31.54
Bottom Auger. For some 1992-1995 pellet models (refer to your owner's manual to verify part number).
NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12).
NOTE: Please include your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out.
Similar to product pictured.
[Add to Cart] [View Cart]

PU-BP96 Feeder/Burn Pot (18 lbs. each)
$224.36
Entire Burn Pot Assembly for all 1996 - 2000 Pellet Units (except 25-PDVC, 55-SHP10 or 55-TRP10 manufactured 1998-2001, see PU-BP98). One-piece unit includes feeder system and burn pot. Click Here to see basic pellet stove diagram.
NOTE: Augers, locking collars and block bearings not included.
NOTE: Please call our parts number at (800) 516-3636 if you suspect that you need this feeder/burn pot assembly. Availability may be limited for this item.
[Add to Cart] [View Cart]

PU-BP96WP Wear Plate (2 lbs. each)
$12.13
Wear Plate for all 1996 - 2000 Pellet Units (except 25-PDVC, 55-SHP10 or 55-TRP10 manufactured 1998-2003, see PU-BP98WP). This is the plate that holds the pellets; it fits inside the burn pot of the stove.
Plate may or may not be exactly like plate pictured here (this is to give a general idea of appearance of part).
Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out.
[Add to Cart] [View Cart]

PU-UCF204-12 Auger Bearing (3 lbs. each)
$23.05
Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each stove, one per auger).
[Add to Cart] [View Cart]

Order Inquiries? Email orders@englanderstoves.com or call (Parts Orders & Inquiries ONLY) - (800) 516-3636.
For Customer Service or Technical Questions - Email service@englanderstoves.com or call (800) 245-6489.

We appreciate your business!!

Your Order
is Secure!