|
Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa or Mastercard on our secure server.
|
|
*Older Model Parts |
AC-DGKC Door Gasket Kit (2 lbs. each)$15.58 Door Gasket Kit for models manufactured after July 1988. 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-G9 Glass Kit (4 lbs. each)$70.35 Door Glass Kit. Includes 9 1/8" x 9 1/8" glass, and gasket necessary to install. Shown on 18-TRD, works on all stoves listed on this page (except large coal and some older models, see notes below). **NOTE: COAL STOVE OWNERS - For 27-C2000 and 50-SHWC2 Coal Stove ONLY, not for 27-C3000 or 50-SHWC3. **NOTE: For older stove models - Check your owner's manual to insure correct part number. Measure the original glass if owner's manual not available. [Add to Cart] [View Cart] |
AC-SH Spring Handle (1 lb. each)$3.64 Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page. [Add to Cart] [View Cart] |
AC-MCSP Charcoal Spray Paint (2 lbs. each)$12.13 **NOTE: Charcoal Gray paint no longer available; order AC-MBSP (black paint). You can change your stove from Gray to Black with two cans of the AC-MBSP paint. [Add to Cart] [View Cart] |
CA-20 6" Flue Collar (4 lbs. each)$37.60 6" flue collar. Comes with gasket and bolts necessary to install. Shown on 18-TRD, works on all stoves listed on this page. NOTE: If you have a wood stove manufactured prior to 1996, measure your flue collar before ordering, you may need the 8" (CA-21) collar. If so, go to the 28-3500 (wood furnace) parts page to add the CA-21 to your Shopping Cart. [Add to Cart] [View Cart] |
BM-1376 Blower Motor (14 lbs. each)$212.17 Blower Motor for our add-on furnace; 850 cfm. NOTE: Does not include thermostat (AC-1339) or power cord. If you want the entire assembly (blower motor, thermostat and power cord), see AC-2835BA. [Add to Cart] [View Cart] |
AC-GGK Glass Gasket Kit (1 lb. each)$14.55 Window glass gasket kit. Includes gasket (3/4" x 6' flat, adhesive on one side). Does not include glass. [Add to Cart] [View Cart] |
AC-106-P / SH-106-P Brass Window Trim (2 lbs. each)$40.02 Brass Window Trim. Comes with clip for installation. Note: Shown on 25-PDVC, works on any stove (wood, pellet, coal or furnace) with our standard sized window (8-1/2" x 8-1/2" window opening). NOTE: Coal Stove owners - for 27-C2000 and 50-SHWC2 ONLY, not for 27-C3000 or 50-SHWC3. [Add to Cart] [View Cart] |
PU-047040 Auger Motor (4 lbs. each)$130.98 1 R.P.M. Auger Motor Assembly for Pellet Units. [Add to Cart] [View Cart] |
|
PU-BP96 Feeder/Burn Pot (18 lbs. each) $224.36 Entire Burn Pot Assembly for all 1996 - 2000 Pellet Units (except 25-PDVC, 55-SHP10 or 55-TRP10 manufactured 1998-2001, see PU-BP98). One-piece unit includes feeder system and burn pot. Click Here to see basic pellet stove diagram. NOTE: Augers, locking collars and block bearings not included. NOTE: Please call our parts number at (800) 516-3636 if you suspect that you need this feeder/burn pot assembly. Availability may be limited for this item. [Add to Cart] [View Cart] |
PU-076002B Combustion Blower (8 lbs. each)$138.55 Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598). NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS. [Add to Cart] [View Cart] |
PU-AF6T Top Auger (7 lbs. each)$27.90 Top Auger. For all pellet units. NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12). [Add to Cart] [View Cart] |
PU-103-50 Hopper Lid Latch (1 lb. each)$16.98 Hopper Lid Latch. One per package. NOTE: For pellet stoves manufactured 2001 and earlier. For pellet stoves manufactured 2002 or later, see Part Number PU-62-40-151-3. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. Shown on 25-PDVC, works on all stoves listed on this page. [Add to Cart] [View Cart] |
PU-UCF204-12 Auger Bearing (3 lbs. each)$23.05 Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each stove, one per auger). [Add to Cart] [View Cart] |
PU-2X570 Locking Collar (1 lb. each)$3.64 3/4" I.D. Auger Shaft Locking Collar for pellet stoves. Price listed is for one piece (two pieces are on each stove, one per auger). [Add to Cart] [View Cart] |
PU-CB98 Digital Control Board (3 lbs. each)$217.09 Digital System Control Board. For models manufactured before 2004. (For models manufactured 2004 or later, see PU-CB04.) **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
PU-AF11B Bottom Auger (6 lbs. each)$31.54 Bottom Auger. For all 25-PDVC/55-SHP10/55-TRP10 units. Also for ALL pellet models 2001 and later. NOTE: For models 1992-2000, and other than 25-PDVC, 55-SHP10 or 55-TRP10 order Part Number PU-AF12B. NOTE: Does not include Locking Collar (PU-2X570) or Block Bearing (PU-UCF204-12). NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
GU-1E30-914 Wall Thermostat (1 lb. each)$46.05 Wall Thermostat. Can be used on all of our pellet units (came standard with B-vent gas stoves). NOTE: Does not turn pellet stove On & Off, it does increase or decrease the pellet feed rate as needed. [Add to Cart] [View Cart] |
AC-3000 3" Pellet Vent Kit (16 lbs. each)$253.41 Through-the-wall 3" Pellet Vent Kit (mfg. by Simpson Dura-Vent). Contains all the parts needed for most pellet installations. NOTE: See AC-3000 page on our site for more info. Not for pellet insert. See Part Number PU-3060F on this site and your manual (and call Technical Support at (800) 245-6489, if questions) for insert installation. See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
AC-103 Brass lip trim for ash apron (1 lb. each)$26.69 Brass lip trim for ash apron. One piece. Note: Shown on 25-PDVC, works on any stove with our standard sized door (12" x 13" opening) with ash apron. NOTE: Pellet Owners - For 2001 and later Freestanding models ONLY, for models prior to 2001 order AC-101-PU/SH-101-PU. Not for Pellet Inserts (order AC-104/SH-104 for inserts). NOTE: Coal Owners - For 27-C2000/50-SHWC2 models ONLY, not for 27-C3000/50-SHWC3 models. [Add to Cart] [View Cart] |
AC-RTV3 Silicone (1 lb. each)$10.91 3 oz. tube black silicone. [Add to Cart] [View Cart] |
PU-HLG Gasket (1 lb. each)$18.98 Hopper Lid Gasket for pellet stove hopper lids. *NOTE: Similar to pictured product. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-62-40-151-3 Hopper Lid Latch (1 lb.)$25.91 Recessed Hopper Lid Latch. One per package. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. For all pellet units manufactured 2002 and later. For units manufactured prior to 2002, see Part Number PU-103-50. [Add to Cart] [View Cart] |
PU-AMS Auger Motor Support Sleeve (1 lb. each)$5.72 Auger Motor Gasket Support Sleeve. Fits around outside air intake, Lower Auger Motor rests on it. [Add to Cart] [View Cart] |
PU-CBG Combustion Blower Gasket (1 lb. each)$11.50 Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-ABG Auger Bearing Gasket (1 lb. each)$5.72 Auger Bearing Gasket. For stoves built 2000 or before. Fits on block bearing (see Part Number PU-UCF204-12). [Add to Cart] [View Cart] |
AC-AV2 Ash Vacuum (30 lbs. each)$249.90 For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). If you have ever tried to vacuum out your ashes with a vacuum cleaner only to turn around when you are done to see a cloud of ash hovering around your head then you have come to the right spot. The AC-AV2 is the Cadillac of Ash Vacuums. With its quite design and powerful motor, this is the vacuum of choice. This vacuum is "the quiet one". Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
PU-SCD Pellet Service Video (Pre-2004, on CD) - (1 lb.)$0.00 For pellet stoves produced before 2004... Video (NOW on DVD) which covers a variety of pellet stove servicing procedures for Englander, Summers Heat and Timber Ridge models. Plays in your DVD player. Video length: Approximately 45 minutes. Learn more about our Pre-2004 Service Video Cost:You pay only Shipping & Handling. [Add to Cart] [View Cart] |
AC-3001 Remote Thermostat (2 lbs. each)$167.48 Enjoy the convenience of remote control with your B-Vent gas or pre-2004 Pellet stove! (Without having to purchase a retro kit or any other expensive adaptation.) System is simple to install - installs in about 5 minutes! This great remote control system will fit your existing Englander, Summers Heat or Timber Ridge Pellet or B-Vent gas stove (fits all B-vent models, and all pellet with manufacture date between 1993 and 2003)(also works with our new 10-CPM/49-SHCPM/49-TRCPM multi-fuel stoves). NOTE: Will NOT work with 2004 or later pellet stove. If you have a 2004 or later pellet stove, see wall thermostat. Learn more about our Remote Thermostat [Add to Cart] [View Cart] |
|
AC-3100 4" Pellet Vent Kit (19 lbs. each) $313.72 Through-the-wall 4" Pellet Vent Kit for high-altitude installations (over 4,000 ft.). Contains all the parts needed for most (high-altitude) pellet installations. Comes with 3" - 4" increaser, so it will work with our stoves (or others) with 3" diameter exhaust. Mfg. by Simpson Dura-Vent. NOTE: See AC-3000 page on our site for more info. Although this info. page will be for the AC-3000 kit, this kit is similar (except that this kit is 4" diameter pipe instead of 3"). Not for pellet insert. See Part Number PU-3060F on this site and your manual (and call Technical Support at (800) 245-6489, if necessary) for insert installation. See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
AC-SHN Nickel Spring Handle (1 lb. each)$3.64 Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod. Shown on 50-SNC13PL, works on all stoves listed on this page. [Add to Cart] [View Cart] |
AC-01 Decorative Knob Set (3 lbs. each)$20.79 Decorative brass knobs. Price and weight shown are for set of two (2) matching knobs. These are designed to simply rest on top of your stove (or any flat surface). [Add to Cart] [View Cart] |
PU-BPG Burn Pot Gasket (1 lb. each)$9.24 Burn Pot Flange Gasket. Fits between the burn pot and the rear of the stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
|
CA-FS02 Cast Feeder Pot (26 lbs. each) *NO Longer Available; CA-FS04 replaces this. See part number CA-FS04. [Add to Cart] [View Cart] |
PU-BP02 Burn Pot (7 lbs. each)$82.51 Burn Pot (firepot) Assembly. This is a one-piece unit, which is the burn pot only (not the entire "feeder system") for the pellet stove. This is a welded assembly. For 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10 and American Standard manufactured from 1998 to present. Also for 25-PAF, 55-SHP25 and 55-TRP25 manufactured from 2002 to present. Click Here to see basic pellet stove diagram. NOTE: Wear plate is included with this part. [Add to Cart] [View Cart] |
PU-BP96WP Wear Plate (2 lbs. each)$12.13 Wear Plate for all 1996 - 2000 Pellet Units (except 25-PDVC, 55-SHP10 or 55-TRP10 manufactured 1998-2003, see PU-BP98WP). This is the plate that holds the pellets; it fits inside the burn pot of the stove. Plate may or may not be exactly like plate pictured here (this is to give a general idea of appearance of part). Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
PU-BP98WP Wear Plate (1 lb. each)$12.13 Wear Plate for all 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10 and American Standard manufactured 1998-2003. Also for 25-PAF, 55-SHP25 and 55-TRP25 manufactured in 2002 and 2003. This is the plate that holds the pellets; it fits inside the burn pot of the stove. Plate may or may not be exactly like plate pictured here (this is to give a general idea of appearance of part). Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
AC-AV Ash Vacuum (30 lbs. each)$229.90 For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-AVT Tool Kit for Ash Vac (2 lbs. each)$19.80 Tool Package for the AC-AV Ash Vacuum. Includes: Crevice Tool, Brush Tool and Pellet Stove Cleaning Hose. This package is a must for pellet stove owners, as the cleaning hose will allow you to reach small openings much easier. Also, Wood and Pellet stove owners: Brush Tool is made of horse hair (very good at cleaning stove door glass!) [Add to Cart] [View Cart] |
AC-103BN Nickel lip trim for ash apron (1 lb. each)$26.69 Nickel lip trim for ash apron. One piece. Note: Shown on 25-PDVC, works on any stove with our standard sized door (12" x 13" opening) with ash apron. NOTE: Pellet Owners - For 2001 and later Freestanding models ONLY; for models prior to 2001 order AC-101-PU/SH-101-PU (which is a brass lip trim kit). Not for Pellet Inserts (order AC-104/SH-104 for inserts). NOTE: Coal Owners - For 27-C2000/50-SHWC2 models ONLY, not for 27-C3000/50-SHWC3 models. [Add to Cart] [View Cart] |
PU-CBF Control Board Fuse (1 lb. each)$6.16 Fuse for Control Board. Box of 5. NOTE: 6 amp fuse, all control boards can take this 6 amp fuse. If purchasing locally, ask for a 6 amp, 120 Volt fuse. [Add to Cart] [View Cart] |
PU-CBHS Control Board Heat Sensor (1 lb. each)$17.04 Heat Sensor for Control Board (the white-covered wire shown in photo). For PU-CB98 or PU-CB04 control boards (used on all pellet stoves manufactured 1998 or later). If you have a stove that was manufactured before 1998, call Customer Service at (800) 245-6489 for information. [Add to Cart] [View Cart] |
AC-106-PBN Nickel Window Trim (2 lbs. each)$40.02 Nickel Window Trim. Comes with clip for installation. Note: Shown on 55-SHP10L, works on any stove (wood, pellet, coal or furnace) with our standard sized window (8-1/2" x 8-1/2" window opening). NOTE: Coal Stove owners - for 27-C2000 and 50-SHWC2 ONLY, not for 27-C3000 or 50-SHWC3. [Add to Cart] [View Cart] |
PU-ABGN Auger Bearing Gasket (1 lb. each)$5.72 Auger Bearing Gasket. For stoves built 2001 or later. New material, replaces PU-ABG. Fits on block bearing (see Part Number PU-UCF204-12). [Add to Cart] [View Cart] |
PU-CMG Combustion Motor Gasket (1 lb. each)$6.33 Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Blower motor, so that you can remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. Replace the gasket each time you remove your motor to clean it. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
|
We appreciate your business!!
|