|
Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa or Mastercard on our secure server.
|
AC-SH Spring Handle (1 lb. each)$3.64 Door spring handle (large). Color: Brass. Fits 1/2" diameter rod. Shown on 10-CPM, works on all stoves listed on this page. [Add to Cart] [View Cart] |
PU-076002B Combustion Blower (8 lbs. each)$138.55 Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598). NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS. [Add to Cart] [View Cart] |
PU-4C442 Convection Blower (6 lbs. each)$130.98 Convection (Room Air) Blower. 140 cfm. **NOTE on Older Models: Model years 1989-90 use one room air blower; Model years 1991-95 use two room air blowers. (If 1991-95 model, stand behind the stove and determine if "left" or "right" blower, and note this in the "Ordering Instructions" box in your Shopping Cart.) Model years 1996 and later use one room air blower. IMPORTANT: This blower is for ALL pellet models except Pellet Utility Furnace, and 2002 and newer Deluxe freestanding and insert pellet models ("Deluxe" models have louvers beside the door). If 2002 or newer "Deluxe" model, see Part Number PU-4C447 Convection Blower. **NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart. [Add to Cart] [View Cart] |
PU-HLG Gasket (1 lb. each)$18.98 Hopper Lid Gasket for pellet stove hopper lids. *NOTE: Similar to pictured product. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-62-40-151-3 Hopper Lid Latch (1 lb.)$25.91 Recessed Hopper Lid Latch. One per package. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. For all pellet units manufactured 2002 and later. For units manufactured prior to 2002, see Part Number PU-103-50. [Add to Cart] [View Cart] |
PU-CBG Combustion Blower Gasket (1 lb. each)$11.50 Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower flange, where blower meets stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-AV2 Ash Vacuum (30 lbs. each)$254.90 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). If you have ever tried to vacuum out your ashes with a vacuum cleaner only to turn around when you are done to see a cloud of ash hovering around your head then you have come to the right spot. The AC-AV2 is the Cadillac of Ash Vacuums. With its quite design and powerful motor, this is the vacuum of choice. This vacuum is "the quiet one". Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-HLS (or PU-HLS) Hopper Lid Safety Switch (1 lb. each)$16.99 Hopper Lid Safety Switch. Sometimes listed as PU-HLS. Important! PLEASE SPECIFY whether you are replacing a "Button" (top image) or a "Arm" (bottom image)switch. You must replace with the type of switch that came with your stove... AND please specify the model number AND manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-VH Vacuum Hose Kit (1 lb. each)$12.07 Vacuum Hose Kit for vacuum shut-down switch. Contains one 21-inch piece and two 12-inch pieces. This should fit whatever model you have. For all stove models listed on this page. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
AC-SHN Nickel Spring Handle (1 lb. each)$3.64 Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod. Shown on 50-SNC13PL, works on all stoves listed on this page. [Add to Cart] [View Cart] |
AC-AV Ash Vacuum (30 lbs. each)$234.90 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-AVT Tool Kit for Ash Vac (2 lbs. each)$19.80 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Tool Package for the AC-AV or AC-AV2 Ash Vacuum (works with either vac). Includes: Crevice Tool, Brush Tool and Pellet Stove Cleaning Hose. This package is a must for pellet stove owners, as the cleaning hose will allow you to reach small openings much easier. Also, Wood and Pellet stove owners: Brush Tool is made of horse hair (very good at cleaning stove door glass!) [Add to Cart] [View Cart] |
PU-CHA Cartridge Heater (Assembled) (1 lb. each)$64.37 Cartridge Heater element for Auto-Start pellet units (Auto-Start units have manufacture date of 2004 or later). Comes with locking collar. This is the element that fits inside the Auto-Igniter element tube...this element fits the bolt-on tube (stoves manufactured before August 2004) as well as the built-in cast tube (stoves manufacutured after August 1, 2004). Please include your stove's Model Number and Date of Manufacture in the Ordering Instructions box before checking out. [Add to Cart] [View Cart] |
CU-047042 2.4 RPM Motor (4 lbs. each)$130.98 2.4 rpm auger motor for multi-fuel unit - models 10-CPM, 49-SHCPM, 49-SHCPML or 49-TRCPM. ALSO is the stirrer Motor for Corn Stove - model numbers 10-CDV, 49-SHC22 or 49-TRC22. ALSO is the auger motor for the pellet utility furnace and the pellet auxiliary heater. [Add to Cart] [View Cart] |
CU-VS Vacuum Shut-Down Switch (1 lb. each)$50.94 Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the firebox of the stove. This part is used in 2006 and later model pellet stoves. Contact Technical Support at (800) 245-6489 if you have any questions. [Add to Cart] [View Cart] |
CU-RG Rubber Vibration Dampener (1 lb. each)$3.64 1/4" wide X 3" Gasket for models listed on this page... Click Here to see an auger motor diagram (from PAH stove), CU-RG is number 29 on diagram. NOTE: Interchangeable with CU-RGN nylon gasket, both perform the same function. [Add to Cart] [View Cart] |
PU-CMG Combustion Motor Gasket (1 lb. each)$6.33 Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Blower motor, so that you can remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. Replace the gasket each time you remove your motor to clean it. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-121 Brass Backplate Trim (3 lbs. each)$99.68 Brass Backplate Trim (fits standard-size coverplate supplied with unit). Fits around top & sides of coverplate; 3-piece set, clips for installation are included. NOTE: Shown on 25-EPI, works on all fireplace insert stoves listed on this page. NOTE: For fireplace insert ONLY, not for freestanding (leg, cabinet or pedestal) units. [Add to Cart] [View Cart] |
AC-120 Brass Window Trim (2 lbs. each)$99.25 Brass Window Trim. This is actually a 15-piece kit that will provide trim for all 3 windows; very good quality, instructions included. Note: Shown on 25-EP, works on any stove listed on this page. [Add to Cart] [View Cart] |
AC-DGKEP Door Gasket Kit (2 lbs. each)$15.58 Door Gasket Kit for "Evolution Pellet" models listed on this page. 3/4" round door gasket, includes silicone necessary to install. IMPORTANT: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-CGEP Cradle Gasket (1 lb. each)$9.24 Cradle Gasket for models listed on this page. Gasket may have round holes or slots, either will work. Click Here to see a parts diagram, Cradle Gasket is number 6 on diagram. This shows the Cradle Gasket on models with "EP" in model number, but is also for models with "PAH" in model number, see owner's manual or parts diagram for your stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-CBEP Digital Control Board (3 lbs. each)$217.09 Digital System Control Board (rear of board is pictured). For "Evolution Pellet" models listed on this page. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
|
IP-25EP Impingement Plate (18 lbs. each) $55.79 Impingement Plate (baffle) for "Evolution Pellet" models listed on this page. Click Here to see a parts diagram, Impingement Plate is number 16 on diagram. Please be sure to list model number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
|
PU-ECCEP Cleanout Covers (1 lb. each) $5.72 Exhaust Cleanout Covers for "Evolution Pellet" models listed on this page. There are two covers (one on either side of the burn pot); this is for the set of both covers. Click Here to see a parts diagram, Cleanout Covers are number 17 on diagram. Please be sure to list model number, serial number and mfg. date in the Ordering Instructions box when you check out. [Add to Cart] [View Cart] |
CA-40 Bay Window Door (8 lbs. each)$142.50 Bay Window-style replacement door (steel) for "Evolution Pellet" models listed on this page. Shown is our Model 25-EP; door works on all models listed on this page. [Add to Cart] [View Cart] |
PU-APEP Ash Pan (8 lbs. each)$65.00 Ash Pan for "Evolution Pellet" models listed on this page. [Add to Cart] [View Cart] |
AC-G40 Glass Kit (4 lbs. each)$98.22 Center Door Glass. Includes 10.675" x 14.438" glass, and gasket necessary to install. Shown on 25-EP, works on all models listed on this page. [Add to Cart] [View Cart] |
AC-G41 Glass Kit (2 lbs. each)$27.86 Side Door Glass Panel. Includes one (1) panel of glass, size 10.675" x 3.938", and gasket necessary to install. If you need both side panels, you will need to order two of these. Shown on 25-EP, works on all models listed on this page. [Add to Cart] [View Cart] |
AC-CFBEP Brick Fiber Board (3 lbs. each)$60.06 Ceramic Fiber Board for "Evolution Pellet" Stove models listed on this page. See picture for reference, also Click Here to see a parts diagram, Fiber Board is number 30 on diagram. [Add to Cart] [View Cart] |
PU-AFEP Auger (2 lbs. each)$31.54 Steel Auger for all "Evolution Pellet" and Pellet Auxiliary Heater Stove models listed on this page. NOTE: Auger only, does not include any other auger assembly parts. Click Here to see an auger motor diagram (from the "EP" Stove), Auger is number 21 on diagram. [Add to Cart] [View Cart] |
PU-BPCEP Burn Pot Cradle (10 lbs. each)$123.80 Burn Pot Cradle for "Evolution Pellet" Stove models listed on this page. This is a one-piece unit, and is the "cradle" that houses the burn pot; it does not include the burn pot (see picture). Click Here to see a parts diagram, Cradle is number 18 on diagram. [Add to Cart] [View Cart] |
PU-BPEP Burn Pot (5 lbs. each)$63.75 Burn Pot unit for "Evolution Pellet" Stove models listed on this page. This is a one-piece unit, and is the actual burn pot (does not include the "cradle" - see picture). Click Here to see a parts diagram, Burn Pot is number 19 on diagram. [Add to Cart] [View Cart] |
AC-LSEP Log Set (3 lbs. each)$75.20 Log set for all "Evolution Pellet" Stove models listed on this page. [Add to Cart] [View Cart] |
CA-AMPP Auger Mounting Plate (5 lbs. each)$30.43 Auger Mounting Plate for stove models listed on this page. Click Here to see an auger motor diagram (from the "EP" Stove), Mounting Plate (Collar) is number 14 on diagram. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
CA-AC Auger Coupler (1 lb. each)$14.55 Auger Coupler for stove models listed on this page. Click Here to see an auger motor diagram (from the "EP" Stove), Auger Coupler is number 15 on diagram. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
|
AC-GSEP Glass Support Set (1 lb. each) $7.59 Glass Support Brackets for all "Evolution Pellet" Stove models listed on this page. This includes the set of brackets (supports). Click Here to see a parts diagram, Glass Support Set is number 22 on diagram. [Add to Cart] [View Cart] |
PU-DVDEP Video for "Evolution Pellet" Models (DVD, 1 lb. each)$0.00 For our "Evolution Pellet" models... DVD which covers a variety of pellet stove installation, maintenance and servicing procedures for Englander, Summers Heat and Timber Ridge models. Cost:You pay only Shipping & Handling. [Add to Cart] [View Cart] |
AC-AVF Filter Package for Ash Vac (1 lb. each)$37.00 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Filter Kit Package for the AC-AV and AC-AV2 Ash Vacuum (works with either vac). Includes: Primary Filter and Secondary Filter (both are required). These filters will typically last for many years depending on the use, but it is a good idea to have a filter package on hand for replacement purposes. [Add to Cart] [View Cart] |
PU-IH Hopper Lid Hinge (1 lb.)$25.91 Recessed Hopper Lid Hinge. One per package. This is the hinge for the hopper lid for all pellet insert models listed on this page. Two per stove, price shown is for one hinge. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-APG Ash Pan Gasket (1 lb. each)$14.55 Gasket kit for the ash pan of the stove. Includes gasket (3/4" wide, adhesive on one side). In the Comments box, be sure to include: Your stove's model number, date of manufacture and serial number. Note: Will be similar to product shown here. [Add to Cart] [View Cart] |
|
AC-GGKEP Glass Gasket Kit (1 lb. each) $19.25 Window glass gasket kit for stoves with "EP" in model number. Includes gasket (approx. 3/4" x 10' flat, adhesive on one side). Does not include glass. For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket. [Add to Cart] [View Cart] |
|
We appreciate your business!
|