|
Whether you own Englander, Summers Heat or Timber Ridge, you'll find the replacement parts and accessories you need right here. Please follow any special instructions for your part; if you have any questions, please call (800) 245-6489 or e-mail
service@englanderstoves.com. Otherwise, you may place your order in confidence with Visa or Mastercard on our secure server. Click Here to see an exploded diagram of the Corn Stove Parts. |
AC-GGK Glass Gasket (and/or Ash Pan Gasket) Kit (1 lb. each)$14.55 Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass. Is also used as Ash Pan gasket on some stoves, see your stove's parts diagram or owner's manual for reference. If ordering for glass gasket and ash pan gasket, you should order two kits. For all orders, in the Comments box, be sure to include 1) Your stove's model number, date of manufacture and serial number AND 2) whether this is being ordered for glass gasket or ash pan gasket. [Add to Cart] [View Cart] |
AC-CS Corn Sifter (24 lbs. each)$89.95 Corn Sifter. Filters out husks and fines for cleaner, more efficient (and trouble-free) burn. Sturdy steel construction. Helps eliminate auger jams from debris in the corn fuel. Requires two, 5-gallon buckets (not included). Learn more about our Corn Sifter [Add to Cart] [View Cart] |
CU-DVD06 Service Video for Corn Units (DVD, 1 lb. each)$0.00 For our Corn Units... DVD which covers a variety of corn stove installation, maintenance and servicing procedures for Englander, Summers Heat and Timber Ridge models. Video length: Approximately 35 minutes. Cost:You pay only Shipping & Handling. [Add to Cart] [View Cart] |
PU-076002B Combustion Blower (8 lbs. each)$138.55 Combustion (Exhaust) Blower. Negative draft. Includes gasket necessary to install, and includes pipe adapter (adapter was formerly Part # CA-1598). NOTE: For all pellet units EXCEPT 25-PFS/PFSP. See PU-4C440 if you have a 25-PFS. [Add to Cart] [View Cart] |
PU-103-50 Hopper Lid Latch (1 lb. each)$16.98 Hopper Lid Latch. One per package. NOTE: For pellet stoves manufactured 2001 and earlier. For pellet stoves manufactured 2002 or later, see Part Number PU-62-40-151-3. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. Shown on 25-PDVC, works on all stoves listed on this page. [Add to Cart] [View Cart] |
PU-HLG Gasket (1 lb. each)$18.98 Hopper Lid Gasket for pellet stove hopper lids. *NOTE: Similar to pictured product. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
PU-62-40-151-3 Hopper Lid Latch (1 lb.)$25.91 Recessed Hopper Lid Latch. One per package. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. For all pellet units manufactured 2002 and later. For units manufactured prior to 2002, see Part Number PU-103-50. [Add to Cart] [View Cart] |
PU-4C447 Convection Blower (6 lbs. each)$150.10 Convection (Room Air) Blower. 250 cfm. **NOTE: For Corn/Multifuel Stoves, Pellet Utility Furnace, Pellet Auxiliary Heater and 2002 and later "Deluxe" freestanding and insert pellet models only ("Deluxe" models have louvers: 25-PDV and 25-PI, 55-SHP22, 55-SHP22L and 55-SHP20, 55-TRP22 and 55-TRP20, American Heritage). For these "Deluxe" models before 2002, or for any other freestanding pellet model, see PU-4C442 Convection Blower. **NOTE: Please include model number and manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart. [Add to Cart] [View Cart] |
PU-CBG Combustion Blower Gasket (1 lb. each)$11.50 Combustion Blower Gasket. Fits on Exhaust (Combustion) Blower flange, where blower meets stove. NOTE: Please enter your stove's Model Number and Date of Manufacture in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
AC-AV2 Ash Vacuum (30 lbs. each)$254.90 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). If you have ever tried to vacuum out your ashes with a vacuum cleaner only to turn around when you are done to see a cloud of ash hovering around your head then you have come to the right spot. The AC-AV2 is the Cadillac of Ash Vacuums. With its quite design and powerful motor, this is the vacuum of choice. This vacuum is "the quiet one". Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
PU-OAK Outside Air Kit for Pellet Units (3 lbs. each)$60.58 This kit is manufactured by England's Stove Works. Provides outside air that is mandatory for most pellet and multi-fuel installations (including all England's Stove Works models). Complete, through-the-wall outside air installation kit for pellet and multi-fuel units includes: Aluminum Flex Hose (expands to 6'); Aluminum Screen; Inside Wall Plate; Outside Wall Plate; Weather Hood; Hose Clamps. For 10-CDV, 25-PDVC, 49-SHC22, 55-SHP10, 55-SHP10L, 49-TRC22, 55-TRP10 and American Standard 1998 and newer. For 25-PDV, 55-SHP22, 55-SHP22L, 55-TRP22 and American Heritage 2001 and newer. For 10-CPM, 49-SHCPM and 49-TRCPM multi-fuel stoves; also for 25-EP, 55-SHPEP, 55-SHPEPL and 55-TRPEP pellet stoves. Will not work with old pellet add-on furnace models (25-PAF). For more information on the PU-OAK Outside Air Kit, Click Here [Add to Cart] [View Cart] |
AC-33100 4" Corn / Multi-fuel Vent Kit (Through-the-Wall) (19 lbs. each)$442.75 Simpson Dura-Vent 4" Corn Vent Kit (Through-the-Wall) for high-altitude installations (over 2,500 ft.). Made especially for corn-burning stoves, which includes our corn and multi-fuel (agri-fuel) models. Includes: Horizontal Cap, 90 Degree Elbow, Wall Strap, (5) Pieces of 12" Strait Length Pipe, Tee w/Clean-out Cap, Wall Thimble, and 3"-4" Adapter/Increaser - so it will work with our stoves (or others) with 3" diameter exhaust. NOTE: See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
CA-12G 6" Gold Plated Leg (4 lbs. each)$51.98 Dress up your stove! 24-K gold-plated leg. Size: 6". Price and weight shown is per leg. Interchanges with regular (gray) cast leg or pedestal of any stove listed on this page except cabinet models (i.e. Golden Eagle). CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. Not for fireplace inserts. [Add to Cart] [View Cart] |
AC-DGKNC Door Gasket Kit (2 lbs. each)$14.55 Door gasket kit (for non-catalytic models listed on this page). Similar to product pictured. Includes silicone necessary to install; 5/8" round gasket. Include your model number and manufacture date in the "Ordering Instructions" box when you check out. [Add to Cart] [View Cart] |
PU-VH Vacuum Hose Kit (1 lb. each)$12.07 Vacuum Hose Kit for vacuum shut-down switch. Contains one 21-inch piece and two 12-inch pieces. This should fit whatever model you have. For all stove models listed on this page. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
CA-12B 6" Cast Leg (black) (4 lbs. each)$27.72 6" Cast leg. Color: Black. Price and weight shown is per leg. Interchanges with pedestal or leg of any stove listed on this page except cabinet models (i.e. Golden Eagle). NOTE: Also replaces CA-12. CA-12 no longer available, order this part instead. CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. Not for fireplace inserts. [Add to Cart] [View Cart] |
AC-AV Ash Vacuum (30 lbs. each)$234.90 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. For fireplaces, barbeques or our wood and pellet stoves (very handy item for our stoves!). Makes for much easier and "cleaner" ash cleaning experience. Comes with flame retardant hose. 3 gallon ash capacity; Height 20". Also available: See our AC-AVT Tool Package. Learn more about our Ash Vacuum [Add to Cart] [View Cart] |
AC-AVT Tool Kit for Ash Vac (2 lbs. each)$19.80 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Tool Package for the AC-AV or AC-AV2 Ash Vacuum (works with either vac). Includes: Crevice Tool, Brush Tool and Pellet Stove Cleaning Hose. This package is a must for pellet stove owners, as the cleaning hose will allow you to reach small openings much easier. Also, Wood and Pellet stove owners: Brush Tool is made of horse hair (very good at cleaning stove door glass!) [Add to Cart] [View Cart] |
|
CA-S12B 6" Leg Set (black) (12 lbs. for set) $108.68 Set of 4 cast legs (6"). Color: Black. Interchanges with pedestal or leg of any stove listed on this page except cabinet models (i.e. Golden Eagle). Not for fireplace inserts. Allows for a totally different look for your stove. CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. See Owner's Manual for instructions on installing. Please include Model Number and Date of Manufacture in "Ordering Instructions" box when checking out. Not for fireplace inserts. [Add to Cart] [View Cart] |
|
CA-S12G 6" Leg Set (Gold) (12 lbs. for set) $205.70 Set of 4 cast legs (6"). 24-K Gold Plated. Interchanges with pedestal or leg of any stove listed on this page except cabinet models (i.e. Golden Eagle). Not for fireplace inserts. Allows for a totally different look for your stove. CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. See Owner's Manual for instructions on installing. Please include Model Number and Date of Manufacture in "Ordering Instructions" box when checking out. Not for fireplace inserts. [Add to Cart] [View Cart] |
AC-G10 9 1/4" x 14 3/4" Glass Kit (4 lbs. each)$105.51 Glass for Corn unit. Includes gasket necessary for installation. **NOTE: Please specify the manufacture date of your stove in the "Ordering Instructions" box of your Shopping Cart before checking out. [Add to Cart] [View Cart] |
CU-047042 2.4 RPM Motor (4 lbs. each)$130.98 2.4 rpm auger motor for multi-fuel unit - models 10-CPM, 49-SHCPM, 49-SHCPML or 49-TRCPM. ALSO is the stirrer Motor for Corn Stove - model numbers 10-CDV, 49-SHC22 or 49-TRC22. ALSO is the auger motor for the pellet utility furnace and the pellet auxiliary heater. [Add to Cart] [View Cart] |
CU-CB05 Digital Control Board (3 lbs. each)$217.09 Digital Control Board for Corn (2005) (#13 on diagram)(rear of board is pictured). **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
CU-VS Vacuum Shut-Down Switch (1 lb. each)$50.94 Vacuum Shut Down Switch. This is the "Door Ajar Switch." The vacuum hose from this switch connects directly to the firebox of the stove. This part is used in 2006 and later model pellet stoves. Contact Technical Support at (800) 245-6489 if you have any questions. [Add to Cart] [View Cart] |
CA-FS Fuel Stirrer (2 lbs. each)$105.00 Fuel Stirrer (stainless) for Corn Stove (models that begin with 10-CDV, 49-SHC22 and 49-TRC22) -- (#6 on diagram). [Add to Cart] [View Cart] |
CU-CFB Brick Fiber Board (3 lbs. each)$60.06 Ceramic Fiber Board for Corn Stove (models that begin with 10-CDV, 49-SHC22 or 49-TRC22) -- (#4 on diagram). [Add to Cart] [View Cart] |
CU-RG Rubber Vibration Dampener (1 lb. each)$3.64 1/4" wide X 3" Gasket for models listed on this page... Click Here to see an auger motor diagram (from PAH stove), CU-RG is number 29 on diagram. NOTE: Interchangeable with CU-RGN nylon gasket, both perform the same function. [Add to Cart] [View Cart] |
CA-14 9" Cast Leg (black) - (5 lbs. each)$29.72 Leg, Cast, 9" long. This is for single leg only, see CA-S14 for set of 4 legs (need 4 to convert to leg model). Interchanges with pedestal or leg of any stove listed on this page except cabinet models (i.e. Golden Eagle). CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. Not for fireplace inserts. [Add to Cart] [View Cart] |
|
CU-047044 4 RPM Auger Motor (4 lbs. each) $130.98 Auger Motor for Corn Stove (4 rpm) (#23 on diagram). [Add to Cart] [View Cart] |
CU-BP Burn Pot (3 lbs. each)$57.79 Burn Pot for Corn Stove (models that begin with 10-CDV, 49-SHC22 and 49-TRC22) -- (#5 on diagram). [Add to Cart] [View Cart] |
CU-ASB Auger Shaft Bushing (1 lbs. each)$2.43 Auger Shaft Bushing for Corn Stove (models beginning with 10-CDV, 49-SHC22 or 49-TRC22) -- Two per stove -- (#32 on diagram) [Add to Cart] [View Cart] |
CU-SC Fuel Stirrer Collar (1 lbs. each)$2.43 Fuel Stirrer Collar for Corn Stove (models that begin with 10-CDV, 49-SHC22 and 49-TRC22) -- (#7 on diagram). [Add to Cart] [View Cart] |
CA-DS Drive Shaft (1 lb. each)$28.69 Fuel Stirrer Drive Shaft for Corn Stove (models that begin with 10-CDV, 49-SHC22 and 49-TRC22) -- (#8 on diagram) [Add to Cart] [View Cart] |
CU-MC Mounting Collar (1 lb. each)$2.43 Mounting Collar for Corn Stove (models that begin with 10-CDV, 49-SHC22 and 49-TRC22) -- (#9 on diagram). [Add to Cart] [View Cart] |
CU-AFC Auger (3 lbs. each)$31.54 Auger for Corn Stove (#10 on diagram) [Add to Cart] [View Cart] |
AC-33000 3" Corn / Multi-fuel Vent Kit (Through-the-Wall) (16 lbs. each)$295.00 Simpson Dura-Vent 3" Corn Vent Kit (Through-the-Wall). Made especially for corn-burning stoves, which includes our corn and multi-fuel (agri-fuel) models. Includes: Horizontal Cap, 90 Degree Elbow, Tee Support Bracket, (5) Pieces of 12" Strait Length Pipe, Tee w/Clean-out Cap, Wall Thimble, and Adapter. NOTE: If installing over 2,500 ft. altitude, use 4" diameter pipe. See Owner's Manual for information on long runs of pipe, basement installs, and general installation information. Always follow local codes. [Add to Cart] [View Cart] |
AC-117 Brass Lip Trim (2 lbs. each)$46.26 Brass Lip Trim for 10-CDV. Three-piece kit. [Add to Cart] [View Cart] |
AC-118 Brass Window Trim (2 lbs. each)$47.85 Brass Trim for window. Shown on 10-CDVP, fits all models listed on this page. [Add to Cart] [View Cart] |
CA-AMP Auger Mounting Plate (5 lbs. each)$26.69 Auger Mounting Plate for Corn Stove (models that begin with 10-CDV, 49-SHC22 or 49-TRC22) -- (#33 on diagram). [Add to Cart] [View Cart] |
|
CA-S14 9" Leg Set (black) (12 lbs. for set) $116.68 Set of 4 Legs, Cast, 9" NOTE: This is for set of 4 legs needed to convert to leg model. Interchanges with pedestal or leg of any stove listed on this page except cabinet models (i.e. Golden Eagle). CAUTION: Changing the leg height will change the installation height of the flue, etc. Call Technical Support if you are unsure of the proper legs for your stove. Not for fireplace inserts. [Add to Cart] [View Cart] |
CA-AC Auger Coupler (1 lb. each)$14.55 Auger Coupler for stove models listed on this page. Click Here to see an auger motor diagram (from the "EP" Stove), Auger Coupler is number 15 on diagram. **NOTE: Please specify your stove's Model Number and Manufacture Date in the "Ordering Instructions" box on the Checkout screen when ordering this part. [Add to Cart] [View Cart] |
AC-AVF Filter Package for Ash Vac (1 lb. each)$37.00 **PLEASE NOTE: This part will drop ship from the manufacturer, and may take a week or longer than parts that ship from our location. Filter Kit Package for the AC-AV and AC-AV2 Ash Vacuum (works with either vac). Includes: Primary Filter and Secondary Filter (both are required). These filters will typically last for many years depending on the use, but it is a good idea to have a filter package on hand for replacement purposes. [Add to Cart] [View Cart] |
|
We appreciate your business!
|