|
England's Stove Works freestanding pellet units are approved for mobile home
or doublewide installation with outside combustion air hook-up. See "Flue
System" section of manual. Mobile home installation should be in accordance
with the Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24.
WARNING: Do Not Install in Sleeping Room.
|
NOTE:
|
England's Stove Works strongly recommends installation of smoke and
carbon monoxide detectors when installing ANY type of stove. |
|
CAUTION: |
The structural
integrity of the mobile home floor, wall and ceiling / roof must be
maintained. |
Secure the heater to the floor using the two holes in the
pedestal. If the unit is on a combustible surface, you will need to drill
matching holes in the floor protection that you choose.
Click here for Floor Protection Section
Do not disturb the
structural integrity of the home, and be sure the unit is permanently
electrically grounded to the chassis of your home. Remember that outside
combustion air is mandatory, and not to install the unit in a sleeping room
of the home.
The England's stove works pellet inserts are not mobile home rated.
|
